- Min Portefølje (0)
GROHE Blue®
Nothing is refreshing as the pure taste of fresh water flowing from a spring. This is why we now offer you GROHE Blue® - the water spring for your own home. It combines a sophisticated designer faucet with a revolutionary high- performance filter.
The electronic settings of GROHE Blue®:
Replacement of the filter
Capacity of the filter
Wrong connection, LED in the handle is green
Change of the water hardness.
Replacement of the filter
Capacity of the filter
Wrong connection, LED in the handle is green
Change of the water hardness.
The electronic settings of GROHE Blue®:
Replacement of the filter
1. Remove the lock and disassemble the filter.
2. Mount the new filter and lock it.
3. Keep your finger on the red LED until this lights up and tap 2 times on the red LED.
4. Then tap again 2 times on the red LED, the green LED will blink 2 times for confirmation.
5. The filter is replaced.
Flushing of the filter
1. Put a bucket under the filter.
2. Open the kitchen faucet.
3. Push the button on the filter and flush min 2 liters.
4. Close the kitchen faucet.
Capacity of the filter
1. Keep your fingers on the red and green LED until they light up, the handle will blink red.
2. Open the handle and take the GROHE carafe. (1liter)
3. Fill the carafe with water and turn the handle back.
4. Confirm the setting, tap 2 times on the red LED.
5. The red and green LED will blink simultaneously and the led in the handle goes out.
6. The capacity is set.
Wrong connection, led in the handle is green
1. Disconnect the electrical connection between the kitchen faucet and the electronic unit.
2. Pull the handle from the kitchen faucet.
3. Connect the electrical connection between the kitchen faucet and the electronic unit.
4. The handle will light up red, wait until the handle lights up green and then replace the handle on the kitchen faucet.
5. When the handle is replaced, wait until the handle lights up blue and open the handle.
6. The blue LED will blink 1 time, close the handle and the problem is solved.
Change of the water hardness.
1. By-pass: A volumetric-flow independent by-pass water proportion ensures constant water quality.
Replacement of the filter
1. Remove the lock and disassemble the filter.
2. Mount the new filter and lock it.
3. Keep your finger on the red LED until this lights up and tap 2 times on the red LED.
4. Then tap again 2 times on the red LED, the green LED will blink 2 times for confirmation.
5. The filter is replaced.
Flushing of the filter
1. Put a bucket under the filter.
2. Open the kitchen faucet.
3. Push the button on the filter and flush min 2 liters.
4. Close the kitchen faucet.
Capacity of the filter
1. Keep your fingers on the red and green LED until they light up, the handle will blink red.
2. Open the handle and take the GROHE carafe. (1liter)
3. Fill the carafe with water and turn the handle back.
4. Confirm the setting, tap 2 times on the red LED.
5. The red and green LED will blink simultaneously and the led in the handle goes out.
6. The capacity is set.
Wrong connection, led in the handle is green
1. Disconnect the electrical connection between the kitchen faucet and the electronic unit.
2. Pull the handle from the kitchen faucet.
3. Connect the electrical connection between the kitchen faucet and the electronic unit.
4. The handle will light up red, wait until the handle lights up green and then replace the handle on the kitchen faucet.
5. When the handle is replaced, wait until the handle lights up blue and open the handle.
6. The blue LED will blink 1 time, close the handle and the problem is solved.
Change of the water hardness.
1. By-pass: A volumetric-flow independent by-pass water proportion ensures constant water quality.